原理
采用了合理的加工顺序 ,并保证了短线结束的加工需求。剥皮方法采用回刀剥皮法 ,有效提高了剥皮质量并减小了损伤的可能性。

设备应用于双芯线的剥皮穿栓压接穿塑壳多工位加工。它是一台半自动设备,操作便利。
操作者只需手动将线插入设备,机器完成对芯线线色的判别,分步完成剥皮/零切/穿栓/压接检测/穿塑壳的动作。它生产产品过程稳定、工作高效、很适合线束生产。

系列产品

SCH500采用了??榛杓评砟?,一定范围线径内免换型。特殊线径可通过更换剥皮刀,触发块,线夹来实现,而更换的过程方便快捷。

适用线径 | 0.13-2.5 mm2 |
护套剥皮长度 | Normally 25+mm |
剥皮长度 | 1-7mm |
压机吨位 | 2T |
压机行程 | 30 or 40 mm |
机器循环时间 | 5.5s(Depend on products) |
生产节拍 | 9s(Depend on OP)
|
尺寸和重量 | L950*W1100*H1600mm 230KG |
电源和气压 | 240VAC 6~8Bar |
Important Notice:ASTI recommends that samples be submitted in cases where there is doubt as to the processing capabilities of a particular machine |